Part #2: Lumin U2 Mini LPS Mod [Completed]

Here we go! Part #2 , the final episode of the Lumin U2 Mini LPS Mod.

In this video, we removed the built-in Switch Mode Power Supply (aka SMPA) of the Lumin U2 Mini, and replaced it with the LHY Audio Lumin PSU Mod Kit.

The following are the tools required to complete the modification.

Tools Required:

1. LHY Audio Lumin PSU Mód Kit

2. LHY Audio LPS25/50/80VA. Power Rating: 12vdc/2a (min)

3. Torx Screwdriver

4. Phillips Screwdriver

5. Wire Cutter

6. Doublesided Tape

The process is pretty straight forward. There is no soldering require. It takes about 15-20mins to complete the job. However! Please read the following disclaimer :)

Disclaimer:

1. Modifications void the product warranty. Lumin U2 Mini, in this case.

2. Please do not attempt to modify the unit if you're not comfortable in electronics modification works

---

Some photos of the modded Lumin U2 Mini:

PSU Kit replaced the built-in SMPS

IEC Power Socket removed, replaced with DC5525 (5.5mm/2.5mm) DC Socket

Lumin U2 Mini, powered by LHY Audio LPS25VA

It is always fun to DIY, mod and tweak the system. Happy watching!

Watch on YouTube

Product Info:

https://www.beatechnik.com/product-page/lhy-lumin-psu-kit

---

Team Vinshine Audio